Charging The Unit - Nevir NVR-7301-TDT10P Instruction Manual

VOLUME+/-: Press the Volume button +/- to increase or decrease
the sound level.
AUDIO: Press the Audio button to change to a different audio
language under TV mode. (This function will only work if the
channel emits in different language)
EXIT: Press the Exit button to Exit the current operation.
SUBTITLE: Press the Subtitle button to activate subtitles while
watching a TV program.
DISPLAY: Press the Display button to show the Program
information which is being played.
FAV: Press the FAV button to save the current channel as
favourite.
PVR: Press the REC button to record a TV program which is being
viewed. Make sure a USB flash is connected before operating this
function.
HOLD: Press the Hold button to pause a Teletext page. Press it
once more to release the pause.
TEXT: Press the Text button to access to the Teletext function.
INDEX: Press this button to go back to the first page when in
Teletext function
REVEAL: Show symbol

CHARGING THE UNIT

The portable TV is powered by a Lithium Polymer battery with an
internal capacity of 2400m Ah. This battery has no memory
effect and therefore can be charged anytime regardless it is half
charged, or partially discharged. It takes approximately 3 hours to fully
charge the battery and the unit can be used for around 2 hours.
Connect the provided AC adaptor to the DC input of the TV set. Plug
in the AC adaptor to the AC outlet. Make sure the voltage indicated on
the rating label corresponds to the AC outlet voltage.
Note: Make sure the unit is set to Power Off before charging. Once
the battery is fully charged, the LED indicator will switch from Red
colour to Green colour.
Battery maintenance:
1. The working temperature of the rechargeable battery ranges from 0º
to 45ºC.
2. Always unplug the unit when it is not being used.
page -8-