OPERATION
30
Auto Dry Function
You can reduces the moisture remaining inside the air conditioner when the air conditioner is turned off.
When pressing the t button after setting the function, evaporator in indoor unit will be automatically dried
as showing counting 00 to 99 on its display panel.
After indicating 99 on the display panel, the unit will be automatically turned off.
• Press and hold the
and Mode simultaneously for about 3 seconds.
t
NOTE
• Auto dry function is released at initial state as standard.
• The indoor unit will respond with beep once and indicate "
" on its display panel. Then Auto dry
s[
function will be set.
• The indoor unit will respond with beep twice and Auto dry function will be removed.
Auto Restart Function
When the appliance is turned on again after a power failure, it resumes operating using the same settings.
• This function is useful in the case of a power failure.
• This function is enabled by the factory default settings.