Fluid module: To create a liquid time indicator that is compact and wearable, HYT has developed a completely new hi-tech concept, using two flexible bellows at each end of a capillary tube. The system is sealed in accordance with the strictest standards applied in the aerospace industry, with each bellow containing immiscible liquids.
For any service, repair or maintenance work, please make sure that you only use dealers approved by HYT or our customer service department. You will find the list of our network of approved dealers on our website www.hytwatches.com.
We advise you carry out an inspection every 5 years. With its waterproof casing, your HYT watch is completely washable. It must be cleaned regularly using warm soapy water, rinsed and then carefully dried with a soft cloth.
QUICK GUIDE 1. Time display (hours) Capillary 2. Minutes hand 3. Crown setting Pos A: winding Pos B: setting the time (pulled out) 4 Minutes display 5 Day display 6 Month display 7 Moon phase A Day setting push button with finger B Month setting with correction tool...
WINDING Pos. A INTRODUCTION This function ensures that the power necessary to operate your watch is stored by the movement. HOW TO USE Wind the watch by turning the crown clockwise as in «A». HYTWATCHES.COM KAIROS TECHNOLOGY SWITZERLAND (KTS) SA PREBARREAU 17 | 2000 NEUCHATEL | SWITZERLAND CONTACT@HYTWATCHES.COM OFFICE +41 32 552 55 58...
SETTING THE TIME Pos. B Turning the crown once is the equivalent of a change of around 15 minutes. INTRODUCTION This function allows the time shown on your watch to be set using the crown. IMPORTANT • The microfluids in the capillary move with the gentle rotation of the crown. •...
SETTING THE TIME COUNTER CLOCKWISE IMPORTANT When the coloured liquid is in zone 1, do not correct the time in the direction opposite to the watch hands. Zone I Zone II DISPLAY TIME EXAMPLES 1) 6:09 2) 10:35 3) 5:50 HYTWATCHES.COM KAIROS TECHNOLOGY SWITZERLAND (KTS) SA PREBARREAU 17 | 2000 NEUCHATEL | SWITZERLAND...
QUANTIEME & MOON PHASE INTRODUCTION The setting of the date and the moon phase begins with the setting of the day, then the month, and then the moon phase. Tool Moon phase corrector with tool Day correction Month corrector push button with tool HOW TO USE 1 SETTING THE DAY...
Need help?
Do you have a question about the MOON RUNNER and is the answer not in the manual?
Questions and answers