Page 2
With this HYT watch, you have joined the age of Hydro-mechanical Horology. HYT represents the link between traditional watchmaking and fluid mechanics. Whichever model you have chosen, it will be part of the same uncompromising HYT philosophy, which is to offer the best in traditional watchmaking combined with unlimited hydro-mechanical creativity.
Page 3
Your HYT watch is guaranteed against all manufacturing defects for five years from the date it was purchased, if the watch was purchased from an approved HYT retailer. This guarantee does not however cover damage caused by incorrect handling or improper use of the watch.
3 years. Temperature variations, moisture, perspiration or repeated impacts may adversely affect its water resistance over the years. With its water resistant case, your HYT watch is fully washable. It should be cleaned regularly in lukewarm, soapy water, rinsed and then carefully dried with a soft cloth. After exposure to sea water, rinse your HYT watch in fresh water.
SETTING THE TImE p.11 COUNTER ClOCkWISE DISPlaY TImE ExamPlES p.12 POWER RESERvE p.13 INDICaTOR THERmal INDICaTOR p.14 CROWN POSITION p.15 INDICaTOR (H-N-R) HYT SA - Route des Falaises 74 Phone + 41 32 323 27 70 2000 Neuchâtel - Switzerland www.hytwatches.com...
Page 6
GlOSSaRY 0. Fluidic module: To create a liquid time indicator that is compact, wearable and multi-purpose, HYT has developed a completely new high-tech concept, using two flexible bellows at each end of a capillary tube. The system is sealed in accordance with the most stringent standards used in the aerospace industry, with each bellow containing immiscible liquids.
Page 7
Pos C.: time setting - “H” (pulled out) 3. Thermal indicator 4. Power reserve indicator (located on the case back) 5. Crown position indicator (H-N-R) HYT SA - Route des Falaises 74 Phone + 41 32 323 27 70 2000 Neuchâtel - Switzerland www.hytwatches.com...
Page 8
Afterwards, push the crown back in against the case and screw it back down • Check from time to time that the crown is fully screwed down. HYT SA - Route des Falaises 74 Phone + 41 32 323 27 70 2000 Neuchâtel - Switzerland...
Page 9
Wind the watch by turning the crown clockwise “B” • Afterwards, push the crown back in against the case and screw it back down “A”. HYT SA - Route des Falaises 74 Phone + 41 32 323 27 70 2000 Neuchâtel - Switzerland...
Page 10
“Zone II” and is minimal when the liquid approaches its starting point in “Zone I”. Zone I Zone II HYT SA - Route des Falaises 74 Phone + 41 32 323 27 70 2000 Neuchâtel - Switzerland www.hytwatches.com...
3:45 counter clockwise counter clockwise at 3:30 the fluid and the to 2:50 to 3:15 hand show 3:45 HYT SA - Route des Falaises 74 Phone + 41 32 323 27 70 2000 Neuchâtel - Switzerland www.hytwatches.com...
Page 12
DISPlaY TImE ExamPlES 1) 6:30 am 2) 10:35 am 3) 5:50 pm HYT SA - Route des Falaises 74 Phone + 41 32 323 27 70 2000 Neuchâtel - Switzerland www.hytwatches.com...
“empty”, and the movement needs to be wound (see WINDING) To ensure optimal operation of the watch, we recommend that you check the movement is fully wound (see WINDING). HYT SA - Route des Falaises 74 Phone + 41 32 323 27 70 2000 Neuchâtel - Switzerland...
The watch can be handled with care (see SETTING THE TIME). The hand will move back to the white area after your watch is worn for 30-40 min. HYT SA - Route des Falaises 74 Phone + 41 32 323 27 70 2000 Neuchâtel - Switzerland...
Page 15
The crown-position hand (H-N-R) lets you know whether you are in time setting mode (H), power reserve winding mode (R) or in the centre (N), when the crown is in its original position. HYT SA - Route des Falaises 74 Phone + 41 32 323 27 70 2000 Neuchâtel - Switzerland...
Need help?
Do you have a question about the h2 and is the answer not in the manual?
Questions and answers