Page 2
Any repair or maintenance work carried out by third parties who have not been approved by HYT will automatically void the guarantee. Any damage caused will then have to be repaired at your expense. HYT WATCHES - KAIROS TECHNOLOGY SWITZERLAND (KTS) SA - Rue de PRébARReAu 17 - 2000 NeucHâTel - SwiTzeRlANd - www.HYTwATcHeS.com...
After exposure to sea water, rinse your HYT watch in fresh water. HYT WATCHES - KAIROS TECHNOLOGY SWITZERLAND (KTS) SA - Rue de PRébARReAu 17 - 2000 NeucHâTel - SwiTzeRlANd - www.HYTwATcHeS.com...
Page 4
PoWer reserve p.12 indicator thermal indicator p.13 croWn Position p.14 indicator (h-n-r) HYT WATCHES - KAIROS TECHNOLOGY SWITZERLAND (KTS) SA - Rue de PRébARReAu 17 - 2000 NeucHâTel - SwiTzeRlANd - www.HYTwATcHeS.com...
Page 5
When the colored liquid gets to 6 o’clock (Zone II), it switches to rewind mode, flowing back to its original position (Zone I). HYT WATCHES - KAIROS TECHNOLOGY SWITZERLAND (KTS) SA - Rue de PRébARReAu 17 - 2000 NeucHâTel - SwiTzeRlANd - www.HYTwATcHeS.com...
Page 6
Pos C.: time setting - “H” (pulled out) 4. Thermal indicator 5. Power reserve indicator (located on the case back) 6. Crown position indicator (H-N-R) HYT WATCHES - KAIROS TECHNOLOGY SWITZERLAND (KTS) SA - Rue de PRébARReAu 17 - 2000 NeucHâTel - SwiTzeRlANd - www.HYTwATcHeS.com...
Page 7
Wind the watch by turning the crown clockwise “B” • Afterwards, push the crown back in against the case “A”. HYT WATCHES - KAIROS TECHNOLOGY SWITZERLAND (KTS) SA - Rue de PRébARReAu 17 - 2000 NeucHâTel - SwiTzeRlANd - www.HYTwATcHeS.com...
“Zone II” and is minimal when the liquid approaches its starting point in “Zone I”. Zone I Zone II HYT WATCHES - KAIROS TECHNOLOGY SWITZERLAND (KTS) SA - Rue de PRébARReAu 17 - 2000 NeucHâTel - SwiTzeRlANd - www.HYTwATcHeS.com...
Page 9
3:45 counter clockwise counter clockwise at 3:30 the fluid and the to 2:50 to 3:15 hand show 3:45 HYT WATCHES - KAIROS TECHNOLOGY SWITZERLAND (KTS) SA - Rue de PRébARReAu 17 - 2000 NeucHâTel - SwiTzeRlANd - www.HYTwATcHeS.com...
Page 10
1) 6:30 2) 10:35 3) 5:50 HYT WATCHES - KAIROS TECHNOLOGY SWITZERLAND (KTS) SA - Rue de PRébARReAu 17 - 2000 NeucHâTel - SwiTzeRlANd - www.HYTwATcHeS.com...
“empty”, and the movement needs to be wound (see WINDING) To ensure optimal operation of the watch, we recommend that you check the movement is fully wound (see WINDING). HYT WATCHES - KAIROS TECHNOLOGY SWITZERLAND (KTS) SA - Rue de PRébARReAu 17 - 2000 NeucHâTel - SwiTzeRlANd - www.HYTwATcHeS.com...
The watch can be handled with care (see SETTING THE TIME). The hand will move back to the white area after your watch is worn for 30-40 min. HYT WATCHES - KAIROS TECHNOLOGY SWITZERLAND (KTS) SA - Rue de PRébARReAu 17 - 2000 NeucHâTel - SwiTzeRlANd - www.HYTwATcHeS.com...
Page 13
The crown-position hand (H-N-R) lets you know whether you are in time setting mode (H), power reserve winding mode (R) or in the centre (N), when the crown is in its original position. HYT WATCHES - KAIROS TECHNOLOGY SWITZERLAND (KTS) SA - Rue de PRébARReAu 17 - 2000 NeucHâTel - SwiTzeRlANd - www.HYTwATcHeS.com...
Need help?
Do you have a question about the H20 and is the answer not in the manual?
Questions and answers