Table of Contents
Advertisement
OTHER ADJ. Menu
1.Push the "MENU" Button.
2.Select the "OTHER ADJ." Menu by pushing
the Position Up "A" or Down "_'" Button and
Access the "OTHER ADJ." Menu by pushing
the "ACTION" Button.
3.Select the required mode by pushing the
Position Up "&" or Down "V" buttons, and set
the appropriate function by the Position Left
"4" or Right "1,-" buttons,
MENU
0THERADJ
_
_ SELECT
3D
¥/C
glL_
INPUT
SWITCH
MODE
Note:
(1) The "OTHER ADJ," menu comprises two
pages,The page displayed will change
automatically when the _
and _
buttons
are pushed.
Mode
Function
PICTURE
Set to "OFF" if you would like to turn off the picture and only tisten to the sound.
* Pictures will always be output from the PROG OUT terminal at the rear of the unit even if
this setting is changed to "OFF".
This setting will return to "ON" if the channel is changed or if the power is turned off and
back on.
3D Y/C FILTER
Set to "OFF" in order to view the picture in its natural format.
*This
setting cannot be changed for signals being input to the S INPUT 1,2 and 4 terminals
or the COMPONENT
VIDEO INPUT 1 to 3 terminals.
FRAME / LINE
Set to "LINE" mode only when using a Video Game machine.
* This setting cannot be changed for 480p, 1080i video signals.
INPUT
SWITCH
MODE
"AUTO". ...... The input is selected automatically to match the component connected, such as a
digital TV tuner.
The input changes as follows each time the INPUT button is pushed.
[
VIDEOI
I .[
VIDEO2
I ,[
VIDEO3
I ,
or*
or*
or*
VIDEO4
ICOMPONENT
VIDE01J_]OOMPONENT VIDE02_'_COMPONENT VIDE03 _
T
[
* If components have been connected to both the VIDEO and COMPONENT
VIDEO terminals, the COMPONENT
VIDEO signals will have priority.
"MANUAL" ..The input changes as follows each time the INPUT button is pushed.
I
VIDEO1
]_)[
VIDEO2
_-
VIDEO3
]-_
VIDEO4
1"
[COMPONENT
VIDE03_<-_[COMPONENT
VIDE02 }_COMPONENTVIDE01_-
. (Only whenconnected)
(Onlywhenconnected) (Only when connected)
26
Advertisement
Table of Contents
