Picture Pos./Size Controls - Panasonic CT-34WDM60 Operating Instructions Manual

PICTURE POS./SIZE Controls
CT-34WDM60
=OWER GAMEINPUT
C_CZ
RECALL MUTE
C_
SLEEP
C_ C_
_OWER SAVE VOL
CD
ASPECT
CZ
P(_E _L_lu oSU_9OOND
EZ}C3
MENU NORMAL
AVADJ. SCREEN
1 _EN
SCREEN Button
When the SCREEN button is pressed, the
Picture Pos./Size menu appears, and the
picture size and vertical picture position can
then be adjusted.
The adjustable items and adjustment ranges
vary for each input signal and aspect mode.
During "AV(S-Video)" and "Component" input signal modes
The Position Left "<" and Right
"1_" buttons can be used to
change the picture size.
The Position Up ",&" and Down
"T" buttons can be used to adjust
the vertical picture position.
POSITION ADJ ,_
L___ _ [ ....... __-_T.1
_ _° ]
Button
Changing the size
Moving the vertical
position (up)
Moving the vertical
position (down)
Picture
Example : "NORMAL" mode
I
Note:
(1) The picture size cannot be changed in "ZOOM" mode when a
480p component signal is being input.
(2) The vertical position cannot be changed when Size 1 and Size
2 have been selected in "NORMAL" mode and when Size 1 has
been selected in "FULL" mode. In addition, the vertical position
cannot be changed when 1080i signals are being input.
"_; Helpful Hint _-j_N°R"A' Normalization)
If the NORMAL button on the remote control unit is pressed when the POSITION ADJ. display is active, all adjustment
values will be returned to the factory setting level.
18