Control System Temperature; Motor Temperature; 2.7.10 Hourglass; Emergency Stop - Permobil R-net LCD color User Manual

2.7.8

Control system temperature

This symbol means that a safety feature has been triggered. This safety
feature reduces the power to the motors, and automatically resets when the
control system has cooled down. When this symbol appears, drive slowly or
stop the wheelchair. If the control system temperature continues to increase
it can reach a level where the control system must cool down, at which point it
will not be possible to drive any further.
2.7.9

Motor temperature

This symbol means that a safety feature has been triggered. This safety
feature decreases the power to the motors, and automatically resets after a
certain period of time. When the system is reset, the symbol disappears.
When this symbol appears, drive slowly or stop the wheelchair. Permobil
recommends that you drive slowly for a short period after the symbol has
disappeared, to prevent unnecessary strain on the wheelchair. If the symbol
appears multiple times and the wheelchair is not driven in any of the
conditions mentioned in the chapter Driving restrictionsof your wheelchair's
user manual, there might be something wrong with the wheelchair. Contact
your service technician.

2.7.10 Hourglass

This symbol appears when the control system is changing between different
states. An example would be entering into programming mode. The symbol is
animated to show falling sand.
2.7.11

Emergency stop

If the control system is programmed for latched drive or actuator operation,
then an emergency stop switch is usually connected to the external profile
switch jack. If the emergency stop switch is operated or disconnected, this
symbol will flash.
18 - R-net control panel with LCD color display