Samsung LA22B450C4H Service Manual page 255

Multi Code Remocon
Multi Code Remocon is a special transmitter which is designed to control each TVs with one remote.
This function is useful in the place a large number of TV are provided like hospital Set ID number will
be displayed in source osd. It is possible to support up to 10 different remote key transmission for multi code.
Initial ID code which each TV has is "0".
- ID code could be from 0 to 9.
- Press Blue Key for over 3 seconds and the digit key a user wants to set.
- Set ID OSD will be displayed in central position.
- The following words will be displayed. "Remote control code is set to x. If you want to change Remote
control code. Enter the digit you want to change." (x is the digit number)
This OSD will be kept displaying until exit key is input.
- For example, TV and Remote will be set ID code #1 if user presses #1.
The following words will be displayed."Remote control code is changed to 1"
Then TV can be controlled by only remote which has same ID code with TV's.
- If ID code does not match between remote and TV, the following words will be displayed.
"TV ID x"(x is the TV's ID)
- To reset ID code, press Yellow key for over 3 seconds. ID code of both TV and Remote will bereset to "0".
"Remote control code is set to 0." will be displayed.
4. Troubleshooting
4-59