Table of Contents
Advertisement
4. Troubleshooting
USB Cloning
USB Cloning is a function to download user configured settings (Picture, Sound, Input, Channel, Setup, and Hotel Setup)
from one TV set and upload the same to other TV sets.
All the user-defined settings from the TV (Master Set) can be copied to the USB device.
* Cloning from TV to USB
It is an operation to copy the stored data from the specifi c area on the EEPROM from the TV set to the USB device.
1.
Insert a USB drive into the USB port on the rear of the TV.
2.
Enter the hotel menu by pressing this buttons in order.
- Interactive mode : INFO → MENU → 0 → 1 → EXIT
- Standalone mode : MUTE → 1 → 1 → 9 → EN
3.
Press the ▲ or ▼ button to select "Clone: TV to USB", then press the ENTER button.
4.
The message "Clone: TV to USB" is displayed, then press the ENTER button.
5.
You can Make sure USB cloning behavior.
- "In Progress" : during copying data to USB.
- "Completed" : copy operation was fi nished successfully.
- "Failed" : copy operation was not fi nished successfully.
- "No USB" : any USB is not connected.
4-56
Advertisement
Table of Contents
