Advertisement
IQ.DRIVE
Features
Activate Cruise Control or Adaptive Cruise Control*
*Depending on vehic l e equipment.
Locate the Cruise Control buttons on the left side of the multi-function
steering wheel.
•
Press the
�/I
button to activate Cruise Control or Adaptive cruise
control depending on vehicle equipment.
•
A speedometer
icon(')
or
�•
cluster display.
Set Cruising Speed
When you get to your cruising speed, press the
1.
A green cruise control indicator light
2.
To increase/decrease the speed by
3.
To increase/decrease the speed by 5 mph increments, press and hold the+ or - button.
4.
Cancel and Resume Cruising Speed
To cancel the cruise speed, press the brake pedal or press the
1.
2.
The green
indicator light will go off
CRUISE
To resume your set speed, press the
3.
Turning Cruise Control System Off
•
Press
�
twice.
/I
Adaptive Cruise Control Distance Level Setting
Applies to vehicles w i th Adaptive Cruise feature. This feature is not a substitute for attentive dr i v i ng.
Adaptive Cruise Control (ACC) helps maintain an individually stored constant speed and a previously set distance between your
vehicle and those in front of you. When you approach a slower moving vehicle in front of you, the vehicle may brake if the
situation requires. When the vehicle is no longer present, ACC will accelerate back to the stored speed. You can set the speed
@
dependent distance
from the vehicle ahead to one of five levels.
•
To change the ACC distance interval, press the
desired distance level. When the shortest interval is reached, the distance returns to the greatest interval when the button
is pressed again.
Travel Assist System
Appl i es to vehic l es equipped with Travel Assist.
Within system limits, Travel Assist system enables your vehicle to steer, accelerate, and brake automatically while also keeping
the vehicle centered in lane. Travel Assist can also maintain a constant distance to vehicles in front, which is selected by the
driver. The driver must maintain supervision as the Travel Assist system is not an autonomous feature.
To enable Travel Assist:
�/I
button on the multi-function steering wheel to activate Adaptive Cruise Control.
Press the
1.
2.
Press the
/�
button to switch from Adaptive Cruise Control to Travel Assist.
Press the
button on the steering wheel at the desired speed.
3.
SET
To cancel Travel Assist, press the brake pedal or press the
4.
To resume Travel Assist, press the
5.
Emergency Assist
Applies to vehic l es equipped with Emergency Ass i st.
Emergency Assist* can recognize driver inactivity and can automatically keep the vehicle in its lane and, if necessary, slow it
down to a stop. While the ignition is on, Emergency Assist is active when:
•
Lane Assist or Adaptive Cruise Control (ACC) are active and the vehicle is in forward motion.
•
The system can detect lane markers on the left and right side of the vehicle.
Note: If Lane Assist is not available, Emergency Assist will not be active.
*Emergency Assist is not a replacement for the driver's attention and works only w i thin the system limitat i ons. Emergency Assist cannot detect all dr i v i ng situations and may not
react, may react w i th a delay, or may react in a way that is not des i red. Emergency Assist also cannot a l ways avoid accidents and ser i ous injury by itself. If you are careless, there is
a r i sk of accidents, serious injur i es and death.
Deactivating Adaptive Cruise Control
Appl i es to vehic l es equipped with Adaptive Cruise Control feature.
To deactivate Adaptive Cruise Control, and use Conventional Cruise
Control:
-
Press
the(�)
button. Depending on vehicle equipment, it may be
1.
on the steering wheel or the end of the turn signal stalk.
Using
the
vertical menu buttons
2.
to
Speed.
Select
in the Digital Cockpit then press the
3.
Cruise Control
button.
Adaptive Cruise Control is now deactivated, and your vehicle will maintain the set speed using conventional cruise control, until
the next ignition cycle.
Assistance System Setting
If your vehicle is equipped with Driver Assistance features, you can
access the Assistance system settings menu in the Infotainment system,
allowing modification to the Driver Assistance feature operation.
j�j
Press the
button from the quick access buttons.
1.
r
Touch the image that represents the feature.
2.
OR
Touch the
=
to make your selection from the system menu in list form.
•
To quickly activate/deactivate driver assist systems within the digital cockpit display, press
(B
Watch the Driver Assistance Systems Menu video.
A
Warni n g: See
Driver
Assistance Systems
features are not substitutes for attent i ve dr i ving.
will appear in the instrument
button on the multi-function steering wheel.
SET
tit')
or�•
will illuminate in the instrument cluster display.
1
mph increments, press the+ or - button.
�/I
tit')
or �•-
button on the multi-function steering wheel.
RES
-
�
button to cycle through the distance intervals until you reach your
�/I
button on the steering wheel.
button on the steering wheel.
RES
�
on the steering wheel, scroll
!OKI
in your Owner's Manua l for more detailed informat i on and for i m portant safety warnings. Dr i ver Assistance
button once on the multi-function steering wheel.
-
the(�)
on the end of turn signal stalk.
Advertisement
