Disassembly Procedure - Bose AMM112 Service Manual

1. Grille Removal
1.1 On the Enclosure of the unit, remove the 4
M6 screws securing the Grille as indicated in
Figure 3.
1.2 Using a spudger, lift up the Grille at the
edge to release the Grille edge from the
snaps. Figure 4.
Re-assembly Note: When installing the
Grille, make sure the grille inserted in the grille
guides.
The install torques of the Grille is around 20
+/-1 kgf*cm.
2. Woofer Removal
2.1 Perform step 1.
2.2. Remove the 12 screws securing the
Waveguide as indicated in Figure 5.
2.3 Use your finger to peel off the 4 Wave-
guide Labels. Figure 6 (left).
Re-assembly Note: The 4 Waveguide Labels
need to be reused.
2.4 Remove the 4 screws that secure the
Waveguide Cover. Figure 6 (right).
2.5 Lift out the Waveguide Cover from the
enclosure.

DISASSEMBLY PROCEDURE

Figure 3. Grille Screws Removal
Figure 4. Grille Removal With Spudger
Figure 5. Waveguide Screws Removal
Figure 6. Waveguide Labels & Waveguide
Cover Removal
9