Gigabyte Z590 GAMING X AX User Manual page 37

& IPv6 PXE Support
Enables or disables IPv6 PXE Support. This item is configurable only when Network Stack is enabled.
& IPv6 HTTP Support
Enables or disables HTTP boot support for IPv6. This item is configurable only when Network Stack is
enabled.
& PXE boot wait time
Allows you to configure how long to wait before you can press <Esc> to abort the PXE boot. This item is
configurable only when Network Stack is enabled. (Default: 0)
& Media detect count
Allows you to set the number of times to check the presence of media. This item is configurable only when
Network Stack is enabled. (Default: 1)
ƒ NVMe Configuration
Displays information on your M.2 NVME PCIe SSD if installed.
ƒ SATA And RST Configuration
& SATA Controller(s)
Enables or disables the integrated SATA controllers. (Default: Enabled)
& SATA Mode Selection
Enables or disables RAID for the SATA controllers integrated in the Chipset or configures the SATA controllers
to AHCI mode.
Intel RST Premium With Intel Optane System Acceleration
AHCI C onfigures the SATA controllers to AHCI mode. Advanced Host Controller Interface
(AHCI) is an interface specification that allows the storage driver to enable advanced
Serial ATA features such as Native Command Queuing and hot plug. (Default)
& Aggressive LPM Support
Enables or disables the power saving feature, ALPM (Aggressive Link Power Management), for the Chipset
SATA controllers. (Default: Disabled)
& Port 0/1/2/3/4/5
Enables or disables each SATA port. (Default: Enabled)
& SATA Port 0/1/2/3/4/5 DevSlp
Allows you to determine whether to let the connected SATA device go into sleep mode. (Default: Disabled)
& Hot plug
Enables or disable the hot plug capability for each SATA port. (Default: Disabled)
& Configured as eSATA
Enables or disables support for external SATA devices.
ƒ Realtek PCIe 2.5GBE Family Controller
This sub-menu provides information on LAN configuration and related configuration options.
Enables RAID for the SATA controller.
- 37 -