Table of Contents
Advertisement
Rinse+Spin
Select this option to rinse and spin a load
separately from a regular cycle. This can be helpful
in preventing fresh stains from setting in fabrics.
Signal
The washer plays a melody when the wash cycle is
finished. The buttons make a sound each time they
are pressed.
• Press and hold the Rinse+Spin button for 3
seconds to turn the sounds on or off.
• When no signal is heard, the signal is off.
Deep Fill
Use this option to add extra water to the wash
cycle for better wash performance with large or
bulky items.
NOTE
• If the washer reaches its maximum water level,
this button will have no effect.
• To add more water while a cycle is running,
pause the cycle and select this option.
• When you select the Normal cycle and the Deep
Fill option, the cycle is changed to the Deep
Wash cycle before starting.
Control Lock
Use this function to disable the controls. This
function can prevent children from changing
cycles or operating this washer.
NOTE
• The function does not lock the door.
• Once this function is set, all buttons are locked
except the Power button.
• When the controls are locked,
remaining time are alternately shown on the
display during the wash cycle.
• Turning off the power will not reset this function.
You must deactivate this function before you can
access any other options and functions.
Locking the Control Panel
1
Turn on the power.
2
Unlocking the Control Panel
1
2
Delay Start
Once you have selected the cycle and other
settings, press this button to delay the start of the
wash cycle.
• Each press of the button increases the delay
• Once the desired delay time is set, press the
NOTE
• If the Start/Pause button is not pressed to begin
Extra Rinse
This option adds an extra rinse to the selected
cycle. Use this option to help ensure the removal
of detergent or bleach residue from fabrics.
• Pressing the Extra Rinse button twice will add
• If a liquid fabric softener is used, it is always
and the
CL
NOTE
• You cannot select this option with the Spin Only
• Selecting the Extra Rinse option with the
Press and hold the Deep Fill button for 3
seconds to activate this function.
Turn on the power.
Press and hold the Deep Fill button for 3
seconds to deactivate this function.
• When this function is deactivated, a chime
will sound and the remaining time for the
current cycle will reappear on the display.
time by 1 hour, for up to 19 hours.
Start/Pause button to start the delay time.
the delay time, the washer automatically turns
off after a certain time and all cycle settings are
lost.
two additional rinses to the cycle.
dispensed in the final rinse.
option and Tub Clean cycle.
Normal cycle automatically changes the cycle to
the Deep Wash cycle.
OPERATION
27
Advertisement
Table of Contents
