Projector + Macintosh - Mitsubishi S120 User Manual

Basic connections (continue)

Projector + Macintosh

Make sure that your equipment is turned off before connection.
Important:
• A monitor output adapter is necessary for a Macintosh if it has no video port. Please contact your dealer.
• If you use the MAC adapter for RGB cable provided, set the dip switch to the appropriate position. See page 12.
• Connectors or analog RGB output adapters may be necessary depending on the personal computer connected to
this projector. Please contact your dealer.
• The audio input for a personal computer is the stereo mini jack. There are some personal computers that have
different types of audio outputs or none at all. Please ask your dealer for details.
• For connection details, refer to the owner's guide for each component.
• When outputting to both a PC monitor and the projector, use an Apple Macintosh monitor or multiscan monitor
corresponding to Composite Sync.
desktop computer
Power Book
to video port
When outputting to both a PC monitor and the projector
to PC
monitor
to video port
desktop
computer
14
to PC audio PC audio
output
cable (option)
to video port
MAC adapter for
RGB cable
Monitor cable
(option)
to PC audio PC audio
output
cable (option)
MAC adapter for
RGB cable
to LINE IN
to RGB IN
RGB cable for PC
Adapter for
Monitor cable
(option)
to RGB OUT
to LINE IN
to RGB IN
RGB cable for PC