Advertisement
Shooting Mode Cine EI
Go To Project Settings
RAW Output – greyed out
SHOOTING
ISO/Gain/EI
Your Base ISO can be set to a low base ISO or
high base ISO. The native ISO choices are 800
and 4000. Once you determine your base you
can adjust your base.
If you are working at base 800, you can select an
ISO between 200 ISO and 3200 and if you are
working at base 4000, you can select an ISO between 1000 and 16,000. Note that
selecting a high ISO may produce an image that is too noisy for the film. Careful testing
will help you decide which ISO (s) will best suit your needs.
*Starting with the base 4000 ISO and dialing down to 2500 may produce results that
your EI during your shoot, it is simple enough to use the menu to make the adjustment.
SONY FX9 Camera Setup
you prefer over dialing up to 2500 from a base of
800.
Next set your Low, Medium, and High exposure
index buttons for the ISO's you prefer.
Note, I
recommend
setting the
three switches
to the same
value, so that in the event that the switch is
accidentally bumped, you do not change your
exposure index unwittingly. If you need to change
3
Advertisement
