Table of Contents
Advertisement
2
Insert the pointed end of the tweezers in the gap between the lower screw mount of
the left 5G mmWave antenna bracket and the frame.
Pry up on the bracket until you can grab it with the tweezers or your fingers.
Be careful not to damage the battery.
Do not use a connector or cable to pull out the module.
If the 5G mmWave antenna feels stuck, apply a microwaveable heating bag for
2 minutes to soften the adhesive. When reheating, it should be heated no longer
than 30 seconds.
3
Remove the left 5G mmWave antenna module.
When removing the 5G mmWave antenna module, be careful not to damage it.
Disassembly and Assembly
94
Advertisement
Table of Contents
