Wall Mounting - AOC 22B30HM2 User Manual

Wall Mounting

Preparing to Install An Optional Wall Mounting Arm.
This monitor can be attached to a wall mounting arm you purchase separately. Disconnect power before this
procedure. Follow these steps:
1. Remove the base.
2. Follow the manufacturer's instructions to assemble the wall mounting arm.
3. Place the wall mounting arm onto the back of the monitor. Line up the holes of the arm with the holes in the back of
the monitor.
4. Insert the 4 screws into the holes and tighten.
5. Reconnect the cables. Refer to the user's manual that came with the optional wall mounting arm for instructions on
attaching it to the wall.
100mm
Specification of wall hanger screws:M4*(8+X)mm, ( X=Thickness of Wall mount bracket )
M=4.0Max
H=2.0
Dk=8.0
Noted: VESA mounting screw holes are not available for all models, please check with the dealer or official
department of AOC. Always contact manufacturer for wall-mount installation.
100mm
M4
M4-P0.7
L=8+X
10