Zenith VRB4215 Operating Manual page 23

Playing Tapes
This page explains how to use the remote to play tapes on your VCR.
Auto/Manual Tracking Adjustment
Your VCR adjusts tracking automatically when you play a tape. If
the tape was recorded on a different VCR, streaks (video noise)
may appear. While the tape is playing, press TRK (M/L) to
adjust the tracking manually.
Real-Time Tape Counter
Press ENTER twice to keep the tape counter on the TV screen.
Press ENTER repeatedly to remove all displays. The counter
resets to 0:00:00 when you insert a cassette or when a tape is
rewound to its beginning.
Pause/Forward/Reverse Slow-Motion Video
(While in play mode) Press PAUSE for still video. Press PAUSE
again, and follow on-screen instructions for Forward or Reverse
slow motion. Press F FWD or REW to control slow speed during
slow motion. Press PLAY to resume normal tape playing.
Note: When the reverse slow mode continues for more than 30
seconds, the VCR will automatically change to play mode.
Tape Rewind and Fast Forward
(While in Stop mode) Press and release REW or F FWD (Fast
Forward), as desired. Press STOP when tape reaches desired
location.
Reverse/Forward Search
(While in Play mode) Press and release REW or F FWD, as
desired. Press PLAY to resume normal tape playing.
CM Skip (Commercial Skip)
(While in play mode) Pressing CM SKIP on the remote skips
commercials or other program material. Pressing 1, 2, 3, or 4
times skips 30, 60, 90, or 120 seconds, respectively. CM SKIP
skips a full 120 seconds of commercials in a few seconds, then
resumes normal playback.
O P E R AT I O N
power
POWER
ch
sp/ep
ENTER
quit
ch
enter
PAUSE
rew play
rec/itr
REW (Rewind)
1 2
4 5
PLAY
7 8
tv/vcr
0
trk
P A G E 2 3
eject
menu F FWD
memory
(Fast Forward)
STOP
f fwd
3
CM SKIP
6
9
cm skip
TRK(Tracking)
(M/L)