Table of Contents
Advertisement
CARE ANDCLEANING
REMOVING AND REPLACING COMPONENTS (CONT.)
To replace Glide'N'Serve
p_
• To remove, pull the drawer out to full extension.
• Lift the front of the drawer up, then pull it straight
out.
• To install, slightly tilt up the front and insert the
drawer into the frame and push it back into place.
&CAUTION
• When you close the refrigerator door with
GLIDE'N'SERVE
DRAWER opened,
that the drawer could be broken.
NOTE: Removing the fixed door bin is recommended
to reduce the risk of door bin scratches.
&CAUTION
• Pinch hazard! Keep hands and feet clear of the
bottom of the door when opening and closing.
&WARNING
Child Entrapment
Hazard
• If the Durabase divider is removed, there is enough
open space for children or pets to crawl inside.
To prevent accidental child and pet entrapment or
suffocation risk, DO NOT allow them to play inside
of drawer.
Ice Bin
Drawer
To separate the ice bin, pull out the drawer to full
extension. Gently lift and pull out the ice bin.
To reinstall, simply set the ice bin in its correct
position.
DuraBase ® Divider
J
33
Advertisement
Table of Contents
