Advertisement
2. Alignment and Adjustments
2-1 Service Mode
2-1-1 SERVICE MODE Entry Method (General Transmitter)
■ Using the Customer Remote
1. Turn the power off and set to stand-by mode.
2. Press the remote buttons in this order; POWER OFF-MUTE-1-8-2- POWER ON to turn the set on.
3. The set turns on and enters service mode.
4. Press the Power button to exit and store data in memory.
※ If you fail to enter service mode, repeat steps 1 and 2 above.
2-1-2 Initial SERVICE MODE DISPLAY State
2-1-2(A) OSD DISPLAY
UPD64083
SAA7119(M)
SAA7119(S)
FLI2300
CXA2171Q
MST9883A
DNIe PRO
OPTION
T-DTVUCOM5-1022(Boot 19)
※ If you need customer setting reset, use only "RESET W/O CP".
If you use "RESET", in order to view the cable DTV with cablecard properly, let user go through subscrption process after
contacting user's cable service provider.
※ "T-CG55NUS0-1005" and "T-DTVUCOM5-1022(Boot 19)" are firmware version.
The firmware version is subject to change without notice.
2-1-2(B) Button Operations in SERVICE MODE
Menu
UP/DOWN
LEFT/RIGHT
(ENTER)
SOURCE button
While in Tuner mode, the direct access buttons can be used to select and change channels.
♣
♣
Samsung Electronics
NTSC
WHITE BALANCE
FHP_LOGIC
RESET W/O CP
RESET
T-CG55NUS0-1005
Displays all menus
Cursor moves to select items
To increase and decrease the data of the selected items
Confirm your choice(Store OR Enter)
Change input source
Alignment and Adjustments
2-1
Advertisement
