Advertisement
⑦ Disconnect the connectors and loosen the screws.
And remove the display pcb cover.
⑨ Remove the defective pdp module with holder brackets
after loosen the screws.
Holder er
Hol
Br Bracket
⑪ Reassemble in reverse order.
Samsung Electronics
⑧ Remove the fan assy and smps.
⑩ Disassemble the holder brackets from the defective
PDP module, and then assemble them with new PDP
module.
※ Notes
1. When the SMPS-PCB or pdp module is replaced, the Va, Vs
voltages must be checked and adjusted to the proper levels
indicated on the panel sticker.(Refer to 2-4 section.)
2. When the Digital PCB is replaced, let user go through
subscrption process after contacting user's cable service
provider.
Alignment and Adjustments
2-15
Advertisement
