Remote Control: Battery Installation And Operating Hints; Using The Remote Control - Zenith P40V22 Owner's Manual

Using The Remote Control

Installing batteries
Notes for using the remote control
Make sure these are no
objects between the
remote control and its
sensor on the monitor.
24
• Open the battery compartment cover on the back
of the remote control and insert the batteries with
correct polarity, match "+" with "+", and match "-"
with "-".
• Install two 1.5V "AA" alkaline batteries.
Don't mix the used batteries with new batteries.
Don't place the remote control near a
heater or in a damp place. A strong
impact on the remote control may
damage it so that it may not work.
The IR signal from the remote
control can be affected by sun
light or other strong light. In this
case, darken the room or
remove the strong light.