Subscribe to Our Youtube Channel
Related Manuals for Siemens WG44G2F2EP
Summary of Contents for Siemens WG44G2F2EP
- Page 1 WG44G2F2EP Washing machine EN User manual and installation instructions Register your appliance on My Siemens and discover exclusive services and offers. Siemens Home Appliances...
- Page 2 Further information and explanations are available online: Table of contents 1 Safety ........... 4 8 Buttons ........ 23 1.1 General information.... 4 9 Programmes ...... 25 1.2 Intended use...... 4 1.3 Restriction on user group.. 4 10 Accessories...... 29 1.4 Safe installation ...... 5 11 Laundry........ 29 1.5 Safe use ........
- Page 3 15.2 Using the manual dosing compartment ...... 33 15.3 Setting the basic dosage amount ........ 34 16 Basic settings...... 34 16.1 Overview of the basic set- tings........ 34 16.2 Changing the basic set- tings........ 34 17 Cleaning and servicing ... 35 17.1 Cleaning the drum.... 35 17.2 Cleaning the detergent drawer........
- Page 4 en Safety 1 Safety Observe the following safety instructions. 1.1 General information Read this instruction manual carefully. ¡ Keep the instruction manual and the product information safe ¡ for future reference or for the next owner. Do not connect the appliance if it has been damaged in transit. ¡...
- Page 5 Safety en 1.4 Safe installation WARNING ‒ Risk of electric shock! Incorrect installation is dangerous. Connect and operate the appliance only in accordance with the ▶ specifications on the rating plate. Connect the appliance to a power supply with alternating cur- ▶ rent only via a properly installed socket with earthing. The protective conductor system of the domestic electrical in- ▶...
- Page 6 en Safety WARNING ‒ Risk of injury! The high weight of the appliance may result in injury when lifted. Do not lift the appliance on your own. ▶ If this appliance is not correctly installed in a washer-dryer stack, the installed appliance may fall. Only stack the dryer on a washing machine using the connec- ▶...
- Page 7 Safety en Wear protective gloves when installing and transporting the ap- ▶ pliance. 1.5 Safe use WARNING ‒ Risk of electric shock! If the appliance or the power cord is damaged, this is dangerous. Never operate a damaged appliance. ▶ Never pull on the power cord to unplug the appliance. Always ▶...
- Page 8 en Safety WARNING ‒ Risk of poisoning! Detergents and care products may result in poisoning if con- sumed. If accidentally swallowed, seek medical advice. ▶ Keep detergents and care products out of the reach of children. ▶ WARNING ‒ Risk of explosion! Laundry that has been pretreated with flammable cleaning agents that contain solvents may cause an explosion in the appliance.
- Page 9 Safety en 1.6 Safe cleaning and maintenance WARNING ‒ Risk of electric shock! Improper repairs are dangerous. Never make any technical modifications to the appliance or its ▶ features. Repairs to the appliance should only be carried out by trained ▶ specialist staff. Only use genuine spare parts when repairing the appliance. ▶...
- Page 10 en Preventing material damage If the water pressure is too high or Preventing material damage 2 Preventing material too low, the appliance may not be able to operate properly. damage Ensure that the water pressure in ▶ the water supply system is at least Preventing material damage ATTENTION! 100 kPa (1 bar) and max.
- Page 11 Environmental protection and saving energy en Set the maximum spin speed if you Environmental protection and saving energy 3 Environmental protec- want to dry the laundry in the tumble tion and saving energy dryer afterwards. a The drier the laundry, the shorter Environmental protection and saving energy the programme duration when dry- 3.1 Disposing of packaging...
- Page 12 en Installation and connection Replace the accessories in ques- ▶ Installation and connection 4 Installation and con- tion before operating the appli- ance. nection → "Accessories", Page 29 Installation and connection Note: The appliance has undergone 4.1 Unpacking the appliance a function test at the factory. This may cause water stains in the appli- ATTENTION! ance, which the first wash cycle re-...
- Page 13 Installation and connection en If the appliance is tilted at an angle 4.4 Removing the transit greater than 40°, residual water may bolts leak out of the appliance and cause material damage. The appliance is secured for trans- Tilt the appliance carefully. portation using transit bolts on the ▶...
- Page 14 en Installation and connection Remove the power cable from the Push the 4 cover caps downwards. holder. Note: To install the transit bolts to Remove the 4 sleeves. transport the appliance, perform these steps again in the reverse or- der. 4.5 Connecting the appliance Connecting the water inlet hose Connect the water inlet hose.
- Page 15 Installation and connection en Open the water tap carefully and Connecting the appliance to the check that the connection points electricity supply are tight. Note: Your electrical domestic install- ation for this appliance must comply Water outlet connection types with the local legal provisions and This information is intended to help safety regulations, and should in- you to connect this appliance to the...
- Page 16 en Before using for the first time To align the appliance, turn the ap- Before using for the first time 5 Before using for the pliance feet. Check that the appli- ance is level using a spirit level. first time Prepare the appliance for use. Before using for the first time 5.1 Starting an empty wash- ing cycle...
- Page 17 Before using for the first time en Add washing powder containing oxygen bleach to the manual dos- ing compartment. To prevent foaming, use only half of the amount of detergent recom- mended by the detergent manufac- turer for light soiling. Do not use detergent suitable for woollens or delicates.
- Page 18 en Familiarising yourself with your appliance Familiarising yourself with your appliance 6 Familiarising yourself with your appliance Familiarising yourself with your appliance 6.1 Appliance You can find an overview of the parts of your appliance here. On certain models, specific details such as the colour and shape may differ from those pictured.
- Page 19 Familiarising yourself with your appliance en Manual dosing compartment → "Using the manual dosing compartment", Page 33 : Dispenser for fabric softener → "Intelligent dosing system", Page 32 : Dispenser for liquid deter- gent → "Intelligent dosing system", Page 32 6.3 Control panel You can use the control panel to configure all functions of your appliance and to obtain information about the operating status.
- Page 20 en Display Display 7 Display The display shows the current settings, options or relevant information. Display Example: Display Display Description 0:40 Expected programme duration or programme time re- maining in hours and minutes. "10" / Program end time → "Buttons", Page 23 Recommendation for the maximum load capacity for the selected program in kg.
- Page 21 Display en Display Description Programme status: Steaming Lights up: The childproof lock is activated. ¡ Flashes: The childproof lock is activated and the appli- ¡ ance has been operated. → "Deactivating the childproof lock", Page 32 The crease-reduction function is activated. → "Buttons", Page 24 Prewash is activated.
- Page 22 en Display Display Description The detergent drawer has not been pushed in fully. → " ", Page 42 E:35 / -10 Error code, error display, signal. → "Troubleshooting", Page 40 Example...
- Page 23 Buttons en Buttons 8 Buttons The selection of programme settings depends on the programme that is set. Buttons Button Selection More information inicio pausa + Start Start, cancel or pause the pro- ¡ carga gramme. Cancel ¡ Pause ¡ varioSpeed Activate Activate or deactivate a shorter pro- ¡...
- Page 24 en Buttons Button Selection More information prelav. Activate Activate or deactivate prewash, e.g. ¡ for washing heavily soiled laundry. Deactivate ¡ Note: If the intelligent dosing system is activated, the detergent will be dis- pensed automatically for the prewash and the main wash. If the intelligent dosing system is de- activated, place the detergent directly in the drum for the prewash and into...
- Page 25 Programmes en Programmes 9 Programmes Programmes Note: The laundry's care labels provide you with additional information on pro- gramme selection. Programme Description Max. load (kg) algodón / al- Wash hard-wearing items made of cotton, linen or godão blended fabrics. Also suitable as a short programme for normally soiled laundry when you activate ...
- Page 26 en Programmes Programme Description Max. load (kg) Programme setting: Max. 60 °C ¡ Max. 1400 rpm ¡ delicado/seda Wash delicate, washable items made from silk, vis- cose and synthetic fabrics. Use a detergent that is suitable for delicates or silk. Note: Wash especially delicate items or items with hooks, eyelets or clips in a mesh laundry bag.
- Page 27 Programmes en Programme Description Max. load (kg) Use a detergent for outdoor fabrics. Use a waterproofing agent that is suitable for ma- chine-washing. Do not use fabric softener. Place the detergent for outdoor fabrics in the manual dosing compartment. If the programme stops before the last rinse cycle, add the water- proofing agent to the manual dosing compartment.
- Page 28 en Programmes Programme Description Max. load (kg) The degree of soiling and the type of fabric are automatically detected. The washing process is ad- apted. Note: The temperature and spin speed cannot be adjusted in this programme and are set automatic- ally. The maximum temperature is 30 °C.
- Page 29 Accessories en Accessories 10 Accessories Use original accessories. These have Accessories been made especially for your appli- ance. Note: Some accessories are avail- able in other colours. Contact → "Customer Service", Page 52. Order num- Water inlet hose ex- Extend the water inlet hose for cold water WZ10131 tension or AquaStop (approx.
- Page 30 en Detergents and care products 13.2 Setting a programme Detergents and care products 12 Detergents and care products Turn the programme selector and set the required programme. The manufacturer's instructions for Detergents and care products → "Programmes", Page 25 use and dosage can be found on the If required, adjust the programme packaging.
- Page 31 Basic operation en 13.5 Starting the programme 13.7 Adding laundry Note: If the intelligent dosing system After the programme starts, you can is activated, make sure that the dis- remove or add laundry depending on the programme status. pensers have been filled → Page 33 and the basic dosage has been set Press inicio pausa + carga.
- Page 32 en Childproof lock Set the programme or a pro- The control elements are locked. gramme for draining the water. The childproof lock remains active → "Programmes", Page 25 even after the appliance has been switched off and in the event of a Press inicio pausa + carga. power cut.
- Page 33 Intelligent dosing system en Pour liquid detergent and fabric 15.1 Pouring liquid detergent softener into the relevant dis- and fabric softener into pensers → Page 18. the dispensers If you are using the intelligent dosing system or if the appliance displays a notification during operation of the appliance, fill the dispensers.
- Page 34 en Basic settings 15.3 Setting the basic dosage Basic settings 16 Basic settings amount You can configure the basic settings Basic settings To allow for intelligent dosing, set the for your appliance to meet your basic dosage amount for the dis- needs. penser. The basic dosage amount corresponds to the dosage recom- 16.1 Overview of the basic mendation from the detergent manu-...
- Page 35 Cleaning and servicing en Press centrif. and, at the same 17.2 Cleaning the detergent time, turn the programme selector drawer to position 2. If you want to replace the liquid de- The display shows the current tergent or fabric softener in the dis- value.
- Page 36 en Cleaning and servicing Remove the pump unit. Clean the pump unit with a damp cloth. Unclip the detergent drawer cover and remove it. Clean the detergent drawer and the cover with a soft, damp cloth or hand shower. Empty the detergent drawer. Dry the detergent drawer, cover and pump unit and reinsert them.
- Page 37 Cleaning and servicing en Open and remove the mainten- ance flap. Clean the housing of the detergent drawer in the appliance. Slide a sufficiently large container under the opening. Push in the detergent drawer. 17.3 Cleaning the drain pump Take the drain hose out of the holder.
- Page 38 en Cleaning and servicing Cleaning the drain pump CAUTION - Risk of scalding! When you wash at high temperat- Requirement: The drain pump is ures, the detergent solution gets empty. → Page 37 hot. Since water may remain in the Do not touch the hot detergent ▶...
- Page 39 Cleaning and servicing en Insert the pump cap. Before the next wash Ensure that the parts of the To prevent unused detergent from ‒ pump cap are correctly as- flowing straight into the outlet in the sembled. next wash, run a suitable programme for draining after you have emptied the drain pump.
- Page 40 en Troubleshooting Troubleshooting 18 Troubleshooting You can rectify minor faults on your appliance yourself. Read the troubleshoot- Troubleshooting ing information before contacting after-sales service. This will avoid unneces- sary costs. WARNING Risk of electric shock! Improper repairs are dangerous. Never make any technical modifications to the appliance or its features. ▶...
- Page 41 Troubleshooting en Fault Cause and troubleshooting "E:36 / -10" Immediate measure: Mix one tablespoon of fabric ▶ softener with 0.5 litres of water and pour the mix- ture into the compartment for manual dosing (not for outdoor clothing, sportswear or items stuffed with down).
- Page 42 en Troubleshooting Fault Cause and troubleshooting "E:30 / -10" and/or First wait approx. 5 minutes until the drain process ends. To reset the error message, switch the appliance off. Switch the appliance back on. If the error message is displayed again, call cus- tomer service.
- Page 43 Troubleshooting en Fault Cause and troubleshooting All other error codes. Malfunction Switch the appliance off and then on again. If the message appears again, disconnect the appli- ance from the power supply for at least 30 seconds by pulling out the plug or by switching off the relev- ant circuit breaker in the fuse box.
- Page 44 en Troubleshooting Fault Cause and troubleshooting The programme does If the display appears again after cleaning the not start. pump unit, or the programme cannot be started, call customer service. → "Customer Service", Page 52 Note: You can deactivate and manually dose the intel- ligent dosing system until the fault is rectified.
- Page 45 Troubleshooting en Fault Cause and troubleshooting The water is not drain- Unapproved extension installed on the water drain ing. hose. Remove any unapproved extensions from the water ▶ hose. → "Connecting the appliance", Page 14 The pump cap is not fully screwed in. Ensure that the pump cap is screwed in all the way ▶...
- Page 46 en Troubleshooting Fault Cause and troubleshooting No water is visible in Water is below the visible area. the drum. Not a fault – no action required. ▶ Do not add any extra water to the appliance while it ▶ is operating. Drum jerks after the This is caused by an internal motor test.
- Page 47 Troubleshooting en Fault Cause and troubleshooting High spin speed not Note: Where possible, mix large and small items in reached. the drum. Different sized items of laundry distribute themselves better during the spin cycle. Start the programme. ▶ The spin programme Drain pipe or water outlet hose is blocked. does not start.
- Page 48 en Troubleshooting Fault Cause and troubleshooting Creasing. The spin speed is too high. The next time you run a wash cycle, set a lower ▶ spin speed. The load is too large. The next time you run a wash cycle, reduce the ▶...
- Page 49 Troubleshooting en Fault Cause and troubleshooting Detergent residue on Unsuitable detergent added to the dispenser of the in- the damp washing. telligent dosing system. Check whether the detergent used is suitable. → "Detergents and care products", Page 30 Drain the dispenser. → "Cleaning the detergent drawer", Page 35 Clean the dispenser.
- Page 50 en Troubleshooting Fault Cause and troubleshooting Insufficient cleaning. Unsuitable detergent added to the dispenser of the in- telligent dosing system. Check whether the detergent used is suitable. → "Detergents and care products", Page 30 Drain the dispenser. → "Cleaning the detergent drawer", Page 35 Clean the dispenser. Refill the dispenser.
- Page 51 Transportation, storage and disposal en 18.1 Emergency release 19.2 Inserting the transit bolts Releasing the door Secure the appliance before trans- Requirement: The drain pump is portation using transit bolts in order empty. → Page 37 to prevent transport damage. ATTENTION! Escaping water may Use a screwdriver to remove the 4 cause material damage.
- Page 52 en Customer Service 19.4 Disposing of old appli- Customer Service 20 Customer Service ance Function-relevant genuine spare parts Customer Service Valuable raw materials can be re- according to the corresponding Eco- used by recycling. design Order can be obtained from Customer Service for a period of at WARNING least 10 years from the date on Risk of harm to health!
- Page 53 Consumption values en Consumption values 21 Consumption values The following information is provided in accordance with the EU Ecodesign Consumption values Regulation. The values given for programs other than the eco 40-60 are indicat- ive only and were determined in accordance with the applicable standard EN60456.
- Page 54 en Technical data identifier is made up of the charac- Technical data 22 Technical data ters before the slash in the product number (E-Nr.) on the rating plate. Al- Technical data ternatively, you can also find the Appliance height 84.5 cm model identifier in the first line of the Appliance width 59.8 cm EU energy label.
- Page 56 EN Manufactured by BSH Hausgeräte GmbH under the trademark licence of Siemens AG Valid within Great Britain: Imported to Great Britain by BSH Home Appliances Ltd. Grand Union House Old Wolverton Road Wolverton, Milton Keynes MK12 5PT United Kingdom BSH Hausgeräte GmbH Carl-Wery-Straße 34...
Need help?
Do you have a question about the WG44G2F2EP and is the answer not in the manual?
Questions and answers