Advertisement
@
при: Jacks
@ Pilot Lamp
Q Master Reverb/Echo Control
To adjust the overall
intensity of the effect.
Q Aux. Volume Control
To adjust the volume
of the signal from the Aux.
jacks going to the Speaker and Phones outputs.
The
volume is independent of the other volume controls,
including Master Volume.
Ф
Monitor Volume Control
Controls
the combined
volume of the signals from
all the channels
going to the Monitor Out output.
Ф
Master Volume
Control
Used to control the combined
volume of the signal
from
all the channels going to the Speaker
and
Phones outputs.
Phones Jack
This
stereo
jack
can
be
used
for stage
or other
monitoring.
VU Meters (EM-100 only)
|
These
meters
show
the volume
level of the unit's
overall
output signal from the Speaker jacks (i.e.,
the signal controlled
by the Master Volume
knob);
they do not show the signal level from the Rec. Out
jacks.
If the level
is so high that the needle
on
either or both channels exceeds +3, sound distortion
will result.
Advertisement
