VOLTCRAFT SEM6500 DUAL Operating Instructions Manual page 25

Bi-directional wi-fi energy consumption meter
Table of Contents

Advertisement

Available languages

Available languages

• Do not use this product in hospitals or medical institutions.
Radiowaves may interfere with medical equipment. The same
may also apply to other areas.
c) Handling and use
• Never plug in, unplug or operate the product when your hands
are damp or wet. There is a risk of a life-threatening electric
shock! The same applies for the load that is plugged into the
socket of the product.
• Never connect the product to the power supply immediately
after it has been transferred from a cold room into a warm one
(e.g. during transport). The condensation that forms might de-
stroy the device. Moreover, there is danger of electric shock!
Allow the product to reach room temperature. Wait until the
condensation has evaporated. This might take several hours.
Only then the product may be plugged into the mains socket
and put into use.
• Always use the gripping surface to pull a mains plug out of
the product. Never unplug a mains plug from a mains socket
by pulling the cable.
• Never overload the product. Note the maximum permissible
connected load in the chapter "Technical Data".
• Do not connect in series! This can lead to an overload of the
product! There is a risk of fire!
• Do not operate while covered! At higher connected loads, the
product becomes warm, which can lead to overheating and
potentially a fire if covered!
25

Advertisement

Table of Contents
loading

This manual is also suitable for:

2891151

Table of Contents