Troubleshooting & Tips; Tv Will Not Turn On; Poor Picture; No Picture - Hi-level 43HL500 Manual

Troubleshooting & Tips

Tv will not turn on

Make sure the power cord is plugged in
securely to wall outlet. The batteries in the
remote control may be exhausted. Press the
Power button on the TV.

Poor picture

• Have you selected the correct TV
system?
• Low signal level can cause picture
distortion.Please check antenna access.
• Check if you have entered the correct
channel frequency if you have done
manual tuning.
• The picture quality may degrade when
two devices are connected to the TV at
the same time. In such a case, disconnect
one of the devices.

No picture

• No Picture means that your TV is not
receiving a transmission. Have you
selected the correct button on the
remote control? Try once more. Also
make sure the correct input source has
been selected.
• Is the antenna connected properly?
• Is the antenna cable damaged?
• Are suitable plugs used to connect the
antenna?
• If you are in doubt, consult your dealer.

No sound

• Has the TV been set to mute? T o cancel
mute, press the " " button, or increase the
volume level.
• Sound is coming from only one speaker. Is
the balance set to one extreme? See Sound
Menu section.
Remote control -
does not operate
• The batteries may be exhausted.
Replace the bateries.
Input sources - can
not be selected
• If you cannot select an input source, it is
possible that no device is connected. if not
• Check the AV cables and connections if
you have tried to connect a device.
English-56