Notification; Inserting The Batteries Into The Remote; Connect Power; Antenna Connection - Hi-level 43HL500 Manual

Inserting the Batteries
into the Remote
Lift the cover on the back of the remote
upward gently. Install two AAA batteries.
Make sure to match the + and - ends of
the batteries in the battery compartment
(observe the correct polarity) Replace the
cover.

Connect Power

IMPORTANT: The TV set is designed to
operate on 220-240V AC, 50 Hz socket.
After unpacking, allow the TV set to reach
the ambient room temperature before you
connect the set to the mains. Plug the power
cable to the mains socket outlet.

Antenna Connection

Connect the aerial or cable TV plug to the
AERIAL INPUT (ANT) socket or satellite
plug to SATELLITE INPUT (LNB) socket
located on the back of the TV.
REAR
OF
THE TV
satellite
aerial
or
cable
English-42

Notification

Manufactured under license from Dolby
Laboratories.
TRADEMARK ACKNOWLEDG-
MENT
"Dolby" and the double-D symbol are
trademarks of Dolby Laboratories.
"HDMI, the HDMI logo and High-Defini-
tion Multimedia Interface are trademarks or
registered trademarks of HDMI Licensing
LLC."
Information for Users on Disposal of Old
Equipment and Batteries
These symbols indicate that equipment
with these symbols should not be dis-
posed of as general household waste. If
you want to dispose of the product or
battery, please consider the collection
systems or facilities for appropriate
recycling.
Caution: "Pb" sign will occur below the
crossed-out wheelie bin symbol if the bat-
tery contains lead.
Products
"In conformity with the WEEE Regula-
tion."
Battery