Hi-level 43HL500 Manual page 52

TV Menu Features and Functions
Mode
Contrast
Brightness
Sharpness
Colour
Power Save
Mode
Backlight
(Optional)
Noise Re-
duction
Advanced Settings
Dyanmic
Contrast
Colour Temp
Picture Zoom
Film Mode
Skin Tone
Colour Shift
RGB Gain
Reset
Autoposition
(in PC mode)
You can change the picture mode to suit your preference or requirements.
Picture mode can be set to one of these options: Cinema,Game,Dynamic
and Natural.
Sets the lightness and darkness values of the screen.
Sets the brightness value for the screen.
Sets the sharpness value for the objects displayed on the screen.
Sets the colour value, adjusting the colors.
To set the Power Save Mode as Eco, Picture Off and Disabled.
(When the Mode is Dynamic, Power Save mode is automatically set as
disabled.)
This setting controls the backlight level. The backlight function will be inac-
tive if the Power Save Mode is set to Eco. The backlight cannot be activated
in VGA, Media Browser mode or while the picture mode is set to Game.
If the broadcast signal is weak and the picture is noisy, use the Noise Reduc-
tion setting to reduce the amount of noise.
You can change the Dynamic Contrast ratio to desired value.
Sets the desired colour tone.
Sets the desired picture size from picture zoom menu.
Note: Auto (Only available in Scart mode with SCART PIN8 high voltage/
low voltage switching)
Films are recorded at a different number of frames per second to normal
television programmes. Turn this feature on when you are watching films to
see the fast motion scenes clearly.
Skin tone can be changed between -5 and 5.
Adjusts the desired colour tone.
You can configure the colour temperature values using the RGB Gain
feature.
Resets the picture settings to factory default settings.(Except Game Mode)
Automatically optimizes the display. Press OK to optimize.
English-51