Electrolux EWF 1090 Instruction Booklet page 16

7.Select the Spin Speed or No Spin
Option
Press the "Spin" button repeatedly, in order to select
the desired spin speed or the No Spin
relevant LED will light up.
If you select the No Spin
stop at the end of the programme eliminating the spin
phase.
EWF 1090
8.Select the desired option
Press the relevent button to select the required
options. Depending on the selected programme, only
certain options are avialable and shown during the
selection phase.
Note:Not all the options are compatible. Those
options not available - cannot be selected.
option. The
option, the machine will
9.Select the Delay Start
The machine to start at a later time, press the Delay
Start button. The figures corresponding to the
selected delay will be displayed for about 3 seconds,
after which the duration of the selected programme
will appear on the display.
During this period it is possible to load other laundry:
• Press "Start/Add clothes" button;
• load the laundry;
• close the door and press "Start/Add clothes"
button again.
10.Start the Programme
Press the "Start/Add clothes" button. The relevant
LED will stop flashing. and only the LED relevant to
the phase that is in progress will remain lit.
If you have chosen a Delay Start, the washing
machine will begin the countdown.
The display will show the duration of the programme
or the selected delay.
11.How to change a programme
during its cycle
You can alter the programme before it starts.
When the programme has started, you can only reset
it by turning the programme selector dial to «Off»
position and then you can select the new
programme. Start it by pressing the "Start/Add
clothes" button.
12.How to interupt a programme
during its cycle
Press the "Start/Add clothes" button to interrupt a
programme which is running, the corresponding LED
starts to flash. Press the same button again to restart
the programme .
16