Electrolux EWF 1090 Instruction Booklet page 11

8. Start/ Add Clothes Button
This button has 2 functions:
Start:
After you have selected the desired programme and
options, press this button to start the washing
machine. The light close to the button will stop
flashing and remain lit. If you have selected a delay
time option, the countdown will begin and will be
shown on the display.
Add Clothes:
When you press this button again, the programme in
progress is interrupted. The light close to the button
will start flashing. To restart the programme, press
the button again. When you press "Add Clothes", it
becomes possible to open the door if:
The washing machine is not in the heating phase;
The level of the water is not high;
The drum is not turning.
Important! You must pause the washing machine
before you make any change in the programme in
progress, by pressing "START/ Add Clothes" button.
9. Programme Phase indicator
Light
By selecting the wash programme, the LED
corresponding to the various phases making up the
programme lights.
After you have started the programme, only the LED
relevant to the phase that is currently being carried
out will remain lit.
At the end of the programme the "End" LED
illuminates.
The "End" LED flashes in the event of operating
problems. And the relative alarm code appears on
the display.
E10 = the machine does not fill
E20 = the machine does not empty
E40 = the door has not been closed
To eliminate the problem, see paragraph "Something
not working".
11