Sony SRX-R510 Operating Instructions Manual page 9

a GPIO 1/2 connector (D-sub 25 pin, female)
For connecting to an external device.
For further details, refer to the "Installation
Manual."
b GPIO 3/4 connector (D-sub 15 pin, female)
For connecting to an external device.
For further details, refer to the "Installation
Manual."
c IMB connector
Used to connect to the projector with the supplied PCI
express cable.
d AUDIO CTRL connector (D-sub 9 pin, male)
Used to control audio devices.
e Fan Unit
An exhaust fan.
f Power unit (-)
Connects with the power cord.
g Power unit B mount
For use with separately-sold expansion power units.
With both power units A and B attached, each can be
used as a redundant power source.
To connect a power unit, contact qualified Sony
service personnel.
h SPARE connector (RJ-45 modular jack)
For future expansions.
i DATA connector (RJ-45 modular jack)
Used to connect to a theater network (LAN) and allow
linking and data transfer with other systems.
Be sure to use a CAT6 or above for the LAN cable.
j CTRL connector (RJ-45 modular jack)
Used to connect to a theater network (LAN) and allow
linking and data transfer with other systems.
Be sure to use a CAT6 or above for the LAN cable.
k PRJ connector (RJ-45 modular jack)
Used to connect to the projector's NETWORK
connector with the supplied LAN cable.
l VGA connector (D-sub 15 pin, female)
Used to connect to the touch panel monitor's VGA
connector with the supplied VGA cable.
For connection instructions, refer to the "Installation
Manual."
m TPC connector
Used to connect to the touch panel monitor's TPC
connector with the supplied USB cable.
For connection instructions, refer to the "Installation
Manual."
n UPS connector
Used to connect to an uninterruptible power supply
(UPS).
9