Restart The Tv - Philips 24PFL4764/F7 User Manual

Audio™ content or DTS audio content back to a home theater receiver that is also
®
sending an audio and video signal into the TV. Using HDMI ARC or eARC reduces the
number of cables needed and controls the volume and mute state of the receiver
while watching TV.
®
HDMI ARC or eARC is disabled by default. To enable it, in the Home screen menu,
navigate to Settings > System > Control other devices (CEC), and then highlight HDMI ARC. Press
OK to enable or disable the feature.
Enable 1-touch play
1-touch play enables a device to control which TV input is active. For example,
pressing Play on your Blu-ray™ player switches the TV to the Blu-ray™ input.
1-touch play is disabled by default. To enable 1-touch play, from the Home screen
menu, navigate to Settings > System > Control other devices (CEC) and highlight 1-touch play.
Press OK to enable or disable the feature.
Enable system standby
The system standby feature causes other devices to power off when you power off
your TV. Depending on the CEC System Standby implementation, it also might enable
connected devices to power off your TV when you power off the device.
System standby is disabled by default. To enable system standby, in the Home screen
menu, navigate to Settings > System > Control other devices (CEC) and highlight System standby.
Press OK to enable or disable the feature.

Restart the TV

You can restart the TV when necessary. Restarting has the same effect as unplugging
the TV power and then plugging it in again.
To restart the TV, navigate to Settings > System > Power, and then select System restart.
Highlight Restart, and then press OK to confirm restart.
152