Control Panel - Cuisinart BREW CENTRAL THERMAL DCC-2400C Instruction And Recipe Booklet

CONTROL PANEL

1. Clock Display
Displays time of day and auto on time.
2. Function Knob
For setting time of day, and auto on
time.
a. Auto On
The Auto On feature is used to program
the start time of the brew cycle. The
auto on time can be set for any time,
day or night. The PM indicator is
displayed on the LCD for nighttime
program times.
b. Program Set
The Program Set function is used to set
the time for the Auto On function.
c. Brew
The Brew function is used to start the
brew cycle directly.
d. Clock Set
Used to program the time of day.
e. Audible Tone (not shown)
The Brew Central Thermal
Coffeemaker is equipped with an
audible tone which will sound 5 times
when the coffee has completed brewing
(coffee will continue to stream from the
filter for a few seconds after tone).
7
3.
4.
5.
6.
7.
TM
On/Off Button
Used to turn your coffeemaker on and
off and works in tandem with the
function knob.
Hour and minute Buttons
For use in setting hour and minute for
time of day, and auto on time.
On/Off and Auto On Indicator Lights
Clean Setting
Used to indicate time to clean your
coffeemaker to remove calcium buildup.
1-4 Cup Setting
For brewing smaller pots of coffee – it
provides double heating of the water, so
coffee is piping hot.