Casio 5724 Operation Manual page 12

To select a World Time City
●
1. Y
Tap the "CASIO WATCHES" icon.
2. X
Hold down (C) for at least three
seconds. Release the button when
[CNCT] and start to flash.
e
When a connection is established
between the watch and phone, [CNCT]
and will stop flashing and remain on the
e
display.
If connection fails for some reason,
●
[ERR] will appear on the display
momentarily and then the watch will
return to the Timekeeping Mode.
Trying to connect
3. Y
Perform the operation shown on the
phone screen. The World Time setting will
be reflected on the watch.
Watch Operation Guide 5724
Configuring the Summer Time Setting
●
1. Y
Tap the "CASIO WATCHES" icon.
2. X
Hold down (C) for at least three
seconds. Release the button when
[CNCT] and
When a connection is established
between the watch and phone, [CNCT]
and
display.
If connection fails for some reason,
●
[ERR] will appear on the display
momentarily and then the watch will
return to the Timekeeping Mode.
Connected Trying to connect
3. Y
Perform the operation shown on the
phone screen to select a summer time
setting.
"Auto"
●
The watch switches between standard
time and summer time automatically.
"OFF"
●
The watch always indicates standard
time.
"ON"
●
The watch always indicates summer
time.
Note
While the summer time setting is
●
"Auto", the watch will switch between
standard time and summer time
automatically. You do not need to
switch between standard time and
summer time manually. Even if you are
in an area that does not observe
summer time, you can leave the
watch's summer time setting as "Auto".
For information about summer time
●
periods, refer to the "Summer Time
Table" or CASIO WATCHES.
Summer Time Table
l
start to flash.
e
will stop flashing and remain on the
e
Connected
Swapping Your World Time and Home
●
Time
1. Y
Tap the "CASIO WATCHES" icon.
2. X
Hold down (C) for at least three
seconds. Release the button when
[CNCT] and start to flash.
e
When a connection is established
between the watch and phone, [CNCT]
and will stop flashing and remain on the
e
display.
If connection fails for some reason,
●
[ERR] will appear on the display
momentarily and then the watch will
return to the Timekeeping Mode.
Trying to connect
3. Y
Perform the operation shown on the
phone screen to swap your Home Time
with your World Time.
Note
Auto time adjustment does not work for
●
24 hours after swapping of the Home
Time and World Time.
Connected
12