Table of Contents
Advertisement
Connection to a 5.1CH Analog Amplifier
1
If using audio cables for 5.1 CH Analog Amplifier (not
included) connect the 5.1CH ANALOG AUDIO OUT termi-
nals on the rear of the DVD player to the 5.1CH ANALOG
AUDIO IN terminals of the 5.1CH Analog Amplifier.
2
Using the video signal cable(s), connect the VIDEO, COM-
PONENT terminals on the rear of the DVD player to the
VIDEO,COMPONENT terminals of your TV as described
on pages 9 to 11.
3
Turn on the DVD player, TV, and Amplifier.
4
Press the input select button of the Amplifier to select exter-
nal input in order to hear sound from the DVD player.
Note
- Please turn the volume down when you turn on the Amplifier. Sudden loud sound may cause
damage to the speakers and your ears.
- Please set the audio in the menu screen according to the Amplifier. (See pages 25 to 27)
- The position of terminals may vary depending on the Amplifier.
Please refer to the user's manual of the Amplifier.
14
RED
BLACK
WHITE
WHITE
RED
BLACK
26-28)
5.1ch Analog
Amplifier
Advertisement
Table of Contents
