Motor Antenna Setup (Diseqc 1.2) - Grundig 65 VLO 9795 SP User Instructions

SETTING­FURTHER­CHANNELS
Motor­antenna­setup­(DiSEqC­1.2)
Note:
The following description about the LNB set-
7
tings premise a substantial expertise about
the satellite systems. Ask your specialist
dealer.
Your television supports DiSEqC 1.2 motorized
satellite systems. This feature allows to control
the satellite through your television.
Adjust the satellite antenna position according
to each satellite. These settings can be stored
and the antenna can be moved to a preset
position.
1­ Open the menu with »MENU«.
2­
Select menu item »Settings« with »
< >
» « or » « and press »OK« to confirm.
3­ Select the menu item »Source« with »
<
» « and press »
– » Source« menu is active.
4­
Select the line »Manual Channel Search«
with » « or »
V Λ
confirm.
5­ Select the option »Satellite (DVB-S/S2)«
with » « or »
V Λ
confirm.
6­
Activate the option »Antenna Settings« with
» « (blue).

– T he »Antenna Settings« menu is dis-
played.
7­ Select the line »DiSEqC Mode« with »
or » « and select »DiSEqC1.2« with »
Λ
>
or » «.
– T he line »DiSEqC 1.2 SETTINGS« is ac-
tive.
8­
Select the line »DiSEqC 1.2 SETTINGS«
with » « or »
V Λ
confirm.
– » DiSEqC 1.2 SETTINGS« menu is dis-
played.
96­ ENGLISH
«, »
V
>
« to confirm.
V
« and press »OK« to
« and press »OK« to
« and press »OK« to
­-----------------------------------------------------
9­ Use »
V
Moving­Mode
Set the Moving Mode with »
»Discrete« or »Continuous«.
– » Discrete«: Moves the antenna to west or
east for the determined step size.
– » Continuous«: Moves the antenna to west
or east continuously.
Step­Size
<
W ith »
the antenna has to rotate. »Step Size« is
active when »Moving Mode« is selected as
»Discrete«.
Move­Motor
Adjusts the antenna for the selected satellite.
Set the antenna to »West« with »
«,
Λ
»East« with »
– » Go To Stored Position«: Moves the
« or
antenna to the preset satellite position.
Maximum 50 positions can be saved.
Select the setting with »
select predefined position with »
>
» « and confirm with »
Antenna will mode to saved position.
– » Store Position«: Stores antenna's current
position. Select setting with »
ton, select recording position with »
>
» « and confirm with »
Limit­Position
– S ets the limit position which the antenna
will be able to move and allows the
antenna to move within the determined
«
V
limits. With »
<
«
»West« direction and with »
limit position in »East« direction.
Reset­DiSEqC­1.2­Limit
– R esets the limit positions set for the an-
tenna.
10­ Press »EXIT« to end the setting.
« or » « to select necessary items.
Λ
<
>
« or » « select the number of steps
>
«.
« (green) button,

« (green) button.

« (green) button.

<
« specify a limit position in
>
« or » « to
<
« and to
<
« or
« (red) but-

<
« or
>
« specify a