Sound Settings - Grundig 65 VLO 9795 SP User Instructions

PICTURE­/SOUND­SETTINGS
Sound­settings­
1­
Open the menu with »MENU«.
2­ Select menu item »Settings« with »
< >
» « or » « and press »OK« to confirm.
3­
Select menu item »Sound« with »
and press » « to confirm.
V
– »Sound« menu is active.
Settings > Sound
Picture Sound Source
Sound Mode
Night Mode
Bluetooth
Select Bluetooth Device
Advanced
Restore Default Sound Settings
Change Area
Note:
Additional operations are explained in the
7
following sections.
Sound­Mode
1­ Select the line »Sound Mode« with »
» «.
Λ
< >
2­
Press » « or » « to select the desired op-
tion.
DTS­Studio­Sound™
DTS Studio Sound is an advanced surround
sound solution suite that accurately extracts and
places audio cues for an immersive surround
experience over the TVs built-in speakers.
DTS Studio Sound Technology is supported in
Film, Natural, Speech and Music settings.
1­
Select the line »Sound Mode« with »
» «.
Λ
2­ Select the option »Movie«, »Natural«,
»Speech« or »Music« with »
«, »
V Λ
< >
« or »
Tuesday
xx xxx xxxx
TV Network Timer Parental
User
Off
Off
- - - -
Back Exit
BACK EXIT
« or
V
« or
V
< >
« or » «.
­ - ----------------------------------------------------------
Night­Mode
Night Mode prevents sound fluctuations and
volume increases.
«,
1­ Select the line »Advanced« from the Sound
menu with »
«
confirm.
2­
Select the line »Night Mode« with »
» «.
Λ
3­ Activate (»On«) or deactivate the night
mode by pressing »
Notes:
»Night Mode« appears in menu if »DTS«
7
has been selected in »Sound Mode«.
Other settings are available under »Ad-
7
vanced«. Select the line »Advanced« with
» « or »
V Λ
Switching­bluetooth­on­/­off­and­regis-
tering­an­external­BT­device
Bluetooth enables the television's audio signal
wireless to be sent to a registered BT device
(e.g. subwoofer).
The signal transmission is possible from the tele-
vision set to a Bluetooth-enabled device, only.
1­
Switch on the appropriate subwoofer and
start the registration on the subwoofer (see
subwoofer operating manual).
2­ Select the line »Bluetooth« with »
» « and switch on with »
Λ
– T he subwoofer is being searched for. After
a short time the subwoofer is displayed in
the menu.
3­
When the subwoofer has been found con-
firm with »OK« .
– T he name of the subwoofer is displayed in
the »Sound« menu.
For DTS patents, see http://patents.dts.com. Manufac-
tured under license from DTS Licensing Limited. DTS,
the Symbol, & DTS and the Symbol together are reg-
istered trademarks and DTS Studio Sound is a trade-
mark of DTS, Inc.
For DTS patents, see http://patents.dts.com. Manu-
factured under license from DTS Licensing Limited.
DTS, the Symbol, & DTS and the Symbol together are
registered trademarks, and DTS 2.0+Digital Out is a
trademark of DTS, Inc.
« or » « and press »OK« to
V Λ
< >
« or » «.
« and press »OK« to confirm.
V
<
« or »
DTS, Inc. All Rights Reserved.
©
DTS, Inc. All Rights Reserved.
©
ENGLISH
« or
V
« or
>
« (»On«).
31­