Table of Contents
Advertisement
38 electrolux building-in
Fitting the vapour protection
Fit the adhesive protection foil onto
the front part of the worktop, along the
entire width.
II21
Fixing to the adjacent units
Secure the dishwasher by screwing it
firmly in position under the bench or
to the cupboard beside it. Use the
angular brackets supplied which are
fitted into the slots on the top of the
dishwasher (see fig.).
Tighten the machine in position
(upwards or sideways) by using the
screws supplied (3.5 x 16 mm).
Tighten the screws so that the
dishwasher cannot tip forward and
cause damage when the door is open
and loaded.
II54
All manuals and user guides at all-guides.com
The dishwasher must be secured
to the underside of the worktop or
to adjacent units by using the
brackets supplied.
Neglect to do this can cause injury
or damage.
Under no circumstances may holes
be drilled through the sides of the
dishwasher since this could
damage the hydraulic components.
Advertisement
Table of Contents
