Memorizing The Channels With Manual Program; Tuning Channels; Adjusting Volume (Sound) - Zenith C27F33 Installation And Operating Manual, Warranty

Basic TV Setup and Operation
Memorizing Channels with Manual Program
Using Memory/Erase button
MANUAL PROGRAM the TV using the convenient memory/erase
button on the remote control.
1. Use the D / or NUMBER buttons to select the channel number
E
you want to memorize or erase.
2. Press the memory/erase button.
The on screen display appears as shown right.
3. Use the memory/erase button to select
4. Press the enter ( ) button to remove menu.
A
Using the Manual Program Menu
1. Press the menu button and then use
menu shown to the right.
G
2. Press the and then use
.
3. Press the G button to enter the
F G
4. Use the / to select
5. Use the button to select
E
F G
6. Use the / or NUMBER buttons to select the channel number
you want to memorize or erase.
7. Use the button to select
E
F G
8. Use the / button to select a word position and then
to enter blank, number to and the alphabet
9. Repeat steps 4 to 8 to memorize or erase other channels.
Channel Tuning
Use the D / button to easily select the next higher or lower channel
E
then the channel being viewed, or NUMBER buttons to directly select
the desired channel.

Adjusting Volume (Sound)

Use the G button to increase the volume level or
the volume level.
To turn off the sound, press the mute button.
The word is displayed (it's not displayed in the Caption mode).
Using Mute is convenient if you need to answer telephone calls.
To restore the muted sound, press the mute button again or vol
button.
or
D / button to select the
E
D / E button to select
mode.
or .
.
.You can make a channel name.
D
to .
F button to decrease
10
.
/ button
E
F G
/
:
i