Zenith C19A02D Operating Manual & Warranty page 7

Hook Up Your Cable Service (CATV)
Connect cable service to your Entertainment Machine.
Locate the Antenna/Cable jack on
1
the back of your Entertainment
Machine.
Connect the cable that runs from
2
the wall directly to this jack,
according to the diagram to the
right.
Remove the back of the remote
3
and put in two AA batteries.
Plug in your Entertainment
4
Machine. Do not plug it into a
switched outlet. Your
Entertainment Machine is
designed to operate on household
current, 120-volt 60 Hertz AC do
not attempt to operate it on DC
Current.
Go to page 10 to Auto Program
5
your Entertainment Machine.
If you're using a cable box, leave your TV on chan-
nel 3 or 4 and use your cable box to change
channels.
Remember, when screwing RF cables onto jacks,
clockwise tightens, and counterclockwise loosens.
If you're using a cable box, Auto- Program might
only find the channel your cable service is on
(usually channel 3 or 4). Don't worry, that's all
you need!
Mini glossary
CABLE SERVICE The wire that supplies all your cable TV (CATV) stations.
2 0 6 - 3 5 8 6
back of
remote
Cable to Entertainment Machine
Cable TV
wall jack
RF coaxial wire (75 ohm)
Cable with Cable Box to
Entertainment Machine
Cable TV
wall jack
Cable box
In
output
Out
switch
RF coaxial wire (75 ohm)
TV back
TV back panel
(expanded view)
Antenna
Cable
TV back
3 4
TV back panel
(expanded view)
Antenna
Cable
P A G E 7