Axis P7304 User Manual page 16

AXIS P7304 Video Encoder
The device interface
Brightness: Use the slider to adjust the light intensity. This can make objects easier to see. Brightness is applied after image
capture, and doesn't affect the information in the image. To get more details from a dark area, it's usually better to increase
gain or exposure time.
Sharpness: Use the slider to make objects in the image appear sharper by adjusting the edge contrast. If you increase the
sharpness, it may increase the bitrate and the amount of storage space needed as well.
Video input
Deinterlacing: Select a method to improve the video stream image quality from analog devices.
• None: No deinterlacing.
• Blending: Improves the image quality without putting too much load on the processor.
• Adaptive interpolation: Applies different filters to the image. Can in rare cases give better results than
motion-adaptive interpolation.
• Motion-adaptive interpolation: Applies different filters to different parts of the video stream image, depending on
the level of motion in different parts of the scene. This option usually gives the best image quality.
Video termination: Turn off when the device is connected alongside other equipment. If you leave video termination on, it can
affect the image quality. We recommend you to only keep video termination turned on for the last device in the video signal chain.
X offset: Enter a value to horizontally adjust the orientation of the image.
Y offset: Enter a value to vertically adjust the orientation of the image.
General
Name: Enter a name for the selected camera.
16