Amplifier/Cable Volume Override - Zenith A50M91W Operating Manual

Amplifier/Cable Volume Override

Amplifier Volume Override:
Find the code that operates your
1
amplifier. Test it to make sure it's the
correct one by following the procedure in
the "Programming Your Remote" section.
Press and hold MUTE and FLSHBK on your
2
remote until the indicator light stays lit.
Press MODE Left/Right until the
3
indicator light is under the mode that
you want Amplifier Volume to appear,
for example, TV.
Enter the special code: 4-9-9, then
4
quickly press the ENTER button. (The
indicator should blink and then turn off.)
Cable Volume Override:
Find the code that operates your
1
cable box. Test it to make sure it's the
correct one by following the procedure in
the "Programming Your Remote" section.
Press and hold MUTE and FLSHBK on your
2
remote until the indicator light stays lit.
Press MODE Left/Right until the
3
indicator light is under the same mode
that you chose in step one.
Enter the special code: 3-9-9, then
4
quickly press the ENTER button. (The
indicator should blink and then turn off.)
Your volume and mute keys now control
your amplifier, while all the other keys
still operate the Entertainment Machine.
To change everything back to default,
reprogram all buttons with their original
codes. See the "Programming Your
Remote" section, page 41.
If you can't find the code for your
amplifier, use the Auto Find feature.
206-3360-O
O P E R AT I O N
cable
3
mode
2
surf
2
5
8
0
pip
play
rew
stop
S P E C I A L F E AT U R E S
Indicator lights
4
4
ffwd
P A G E 4 5
Control the
volume on
your sound
amplifier
while in
other modes.