Front Panel Controls - Zenith XBV322 Installation And Operating Manual

Front Panel Controls

Disc Tray (DVD deck)
Insert a disc here.
Shows the current status of the DVD+VCR.
OPEN/CLOSE (Z Z )
Opens or closes the disc tray.
Reverse SKIP/SCAN
DVD: Go to beginning of current chapter/track or to previous
chapter/track. Press and hold for a fast reverse search.
VCR: Rewinds the tape during the STOP mode or for fast reverse picture search.
Reverse will work in the Stop or Play modes.
PAUSE/STEP(X X /C
Pause playback of a tape or a disc
in the DVD or VCR deck
temporarily/press repeatedly for
frame-by-frame playback.
STOP (x x )
Stops playback of a disc or tape.
COPY
Press to copy a DVD in the
DVD deck to a VHS tape in
the VCR deck.
POWER
Switches the DVD+VCR ON and OFF.
To record normally or to activate Instant Timer Recording.
To scan up or down through memorized channels.
Cassette Compartment (VCR deck)
Insert a video cassette here.
Remote Sensor
Point the DVD+VCR remote control here.
Display window
Forward SKIP/SCAN
DVD: Go to NEXT chapter/track. Press and hold for
two seconds for a fast forward search.
VCR: Advances the tape during the STOP mode or for
fast picture search.
Fast Forward will work in the Stop or Play modes.
PLAY
Select one of your output sources to
To play back a
view on the TV screen between DVD
recorded tape
or disc.
C )
EJECT(Z Z )
Ejects the tape in the VCR deck.
REC/ITR (z z )
CH (v v /V V )
DVD/VCR (output select)
and VCR.
LINE 2 (VIDEO IN/AUDIO IN (Left/Right))
Connect the audio/video output of an
external source (Audio system,
TV/Monitor, another VCR).
7