Preparation; Operation - Zenith XBV322 Installation And Operating Manual

Before VCR Operation (Continued)
Setting the VCR Setup Menu Options
Press MENU and the MAIN menu will appear.
1 1
Use v v /V V to select the SETUP menu, then press
2 2
SELECT/ENTER.
Use v v /V V to choose a desired option on the
3 3
SETUP menu. Then use b b /B B to choose a
desired setting.
FUNCTION OSD
b B
LANGUAGE SELECT
AUDIO MODE
b B
BROADCAST TYPE (STEREO/SAP/MONO)
b B
AUDIO OUTPUT (STEREO/LEFT/RIGHT)
b B
Press MENU when finished.
4 4
b B
Channel Selection

Preparation:

AUTO CHANNEL PROGRAMMING
Press MENU and the MAIN menu will appear.
1 1
Use v v /V V to select the TUNING menu, then press
2 2
SELECT/ENTER.
Use V V to choose the SOURCE SELECT option,
3 3
then use b b /B B to select TUNER.
b B
Use v v /V V to choose the AUTO CHANNEL SET
4 4
option, then use b b /B B to set the channel.
After the AUTO CHANNEL SET has found all the
5 5
available channels, set the TUNING BAND on
the Tuning Menu, Choose TV or CATV using the
b b /B B arrows
Press MENU to return to the TV screen.
6 6
Use v v /V V or CH (v v /V V ) on the front panel to cycle
7 7
the DVD+VCR through the channels in memory.
TO ADD OR ERASE CHANNELS FROM MEMORY
1 V V
b B
2 SELECT/ENTER
3 MENU
15