Yamaha EC-03 2012 Owner's Manual page 29

7. Push button 2 "SET". The security
number flashes for a few seconds,
and then the vehicle enters the
riding mode.
TIP

Be sure to record the security
number and keep it in a safe place.

Pushing button 3
switches the display between "OK"
and "NG".

To change the registered security
number, switch the display to "NG"
by pushing button 3 "SELECT",
and then push button 2 "SET". Re-
peat the procedure from step 5.
INSTRUMENT AND CONTROL FUNCTIONS
Locking and unlocking the security
lock
Locking the security lock
Push button 2 "SET" for a few seconds.
When the security lock is locked, the
security lock indicator "
played.
1
"SELECT"
1. Security lock indicator "
TIP
Do not lock the security lock when hav-
ing a Yamaha dealer perform service or
repairs on the vehicle.
Unlocking the security lock
Change to the standby mode by push-
ing one of the buttons, then enter the
security number. (See "Preparations
for starting off" on page 7-1.)
LOCK" is dis-
LOCK"
4-10
2
3
4
5
6
7
8
9