Stopping Play; Resume Play; Last Scene Memory; Screen Saver - Zenith DVD5201 Operating Manual

Basic Playback (Cont'd)
power
marker search open / close
-
audio subtitle angle random
program
1 2 3
clear
4 5 6
7 8 9 0
menu title setup return
repeat a - b disc skip

Screen Saver

Press STOP during playback.
When play is stopped, the unit records the point where
STOP was pressed (RESUME function).
Press PLAY and play will resume from this point.
Notes
PLAY
This operation works only with discs for which the elapsed play-
ing time appears in the DVD display window during stop.
Resume function will be cleared when the STOP is pressed in
the STOP mode.
STOP
The Resume function may not be available on some DVD discs.
This player memorizes last scene for the last disc you have
watched. Settings remain in memory even if you remove the
disc from the player or switch off the player. If you load a disc
that has its settings memorized, Latest Stop Position is
automatically recalled.
Notes
Settings are stored in memory for use any time.
Switching of the audio mode, etc., is automatic on some discs.
This player does not memorize if you switch off the player when
a DVD or title menu appears on the TV screen.
The last scene memory function will be cleared when the STOP
is pressed in the STOP mode.
The screen saver is useful to prevent your display from becom-
ing damaged.
The screen saver picture appears when you leave the DVD
player in stop mode for about 5 minutes.
Automatic power off function
After the Screen Saver has been engaged for about 5 minutes,
the DVD player will automatically turn itself off.
BASIC OPERATION

Stopping Play

Resume Play

Last Scene Memory

Screen Saver
PAGE 19