Stopping Play; Resume Play; Last Scene Memory; Screen Saver - Zenith DVD5591 Operating Manual

PAGE 22 BASIC OPERATION
Basic Playback (Cont'd)
power
dvd vcr catv tv
display
title
ch
select /
vol enter
ch
skip
play
STOP
setup subtitle audio
repeat a - b random
clear disc skip
slow/scan
rev

Screen Saver

open / close
Press STOP during playback.
menu return
tv input
vol
skip
PLAY
program
angle
This player memorizes last scene for the last disc you have
watched. Settings remain in memory even if you remove the
disc from the player or switch off the player. If you load a disc
that has its settings memorized, Latest Stop Position is
fwd
automatically recalled.
The screen saver is useful to prevent your display from becom-
ing damaged.
The screen saver picture appears when you leave the DVD
player in stop mode for about 5 minutes.
Automatic power off function
After the Screen Saver has been engaged for about 5 minutes,
the DVD player will automatically turn itself off.

Stopping Play

Resume Play

When play is stopped, the unit records the point where
STOP was pressed (RESUME function).
Press PLAY and play will resume from this point.
Notes
This operation works only with discs for which the elapsed play-
ing time appears in the DVD display window during stop.
Resume function will be cleared when the STOP is pressed in
the STOP mode.
The Resume function may not be available on some DVD discs.

Last Scene Memory

Notes
Settings are stored in memory for use any time.
Switching of the audio mode, etc., is automatic on some discs.
This player does not memorize if you switch off the player when
a DVD or title menu appears on the TV screen.
The last scene memory function will be cleared when the STOP
is pressed in the STOP mode.
Screen Saver