Table of Contents
Advertisement
Alcove or closet installation
For alcove or closet installation, the dryer requires the following minimum clearances:
Sides
25 mm
If installing the dryer with a washing machine, the front of the alcove or closet must have an unobstructed
air opening of at least 550 mm.
Step-by-step installation
Before you install your dryer, make sure you have read Installation requirements on page 16.
STEP 1 Select a location
Location requirements
Select a level, well-constructed surface that will withstand vibrations. Select a location where a grounded,
3-prong outlet is easily accessible.
For convenience, consider installing the dryer next to your washing machine.
WARNING
• Install the dryer indoors only.
• Do not install the dryer in areas exposed to the weather.
• The ambient temperature for installation is 5~35℃.
If the ambient temperature is low enough to freeze the condensed water in the dryer and hoses, the
-
dryer may not operate, or can be damaged.
Make sure that the temperature where the dryer is installed is not outside the recommended
-
temperature range. Drying performance may be reduced.
Make sure not to install the dryer in an enclosed environment or near any heat producing appliances.
-
• Do not install the dryer where gas may leak.
• Do not use in a poorly ventilated space or area.
• Use only a power source connected to the wall.
B-PJT_DV9400B_SimpleUX_DC68-04400M-00_EN (SA).indd 17
Top
25 mm
Front
490 mm
Rear
50 mm
English
17
2023/4/10 15:30:14
Advertisement
Table of Contents
