Continuity Check - SEFRAM BK390B User Manual

Continuity Check

CAUTION

To avoid possible damage to the meter or to the equipment
under test, disconnect circuit power and discharge all
high voltage capacitors before testing continuity.
The continuity check features a buzzer that sounds as long as
a circuit is complete. The buzzer allows you to quick continuity
checks without watching the display.
When measuring resistance is less than threshold, the buzzer
sounds. You can setup the threshold in setup mode.
The continuity threshold is default 30Ω.
To use continuity check, turn the rotary switch to resistance
position, then press the function (yellow) button to select
measuring mode.
12